1211
Gauge Name: Buttress Run-out Gauge
Thread Type: Buttress Casing
Size Range: All External Threads 4 Ω" & Larger
Dial Type: 0-15-0, Balanced
Graduation: 0.0005"
Dial Travel: 1/8" 
Anvil Position: The body of this gauge is designed to remain parallel with the threads on the pipe while in use. It utilizes two tungsten carbide contacts that fit in the threads of the pipe to make a more steady and solid fit of the gauge into the pipe thread.
.
Description: The 1211 Buttress Run-Out Gauge is used to check the threading tool run-out on external API Buttress Casing thread. The body is stabilized in the thread grooves through the two specially designed Tungsten Carbide contacts, allowing the measuring point to record a true run-out reading of the thread root near the triangle marking.



1211-A

Gauge Type: Buttress Run-out Gauge
Thread Type: Buttress Tubing (0-45 Degree)
Size Range: All External Threads 4 Ω" & Larger
Dial Type: 0-15-0, Balanced
Graduation: 0.0005"
Dial Travel: 1/8" 
Anvil Position: The body of this gauge is designed to remain parallel with the threads on the pipe while in use. It utilizes four tungsten carbide contacts that engage the thread grooves to make a more steady and solid fit of the gauge into the pipe thread.

.
Description: The 1211-A Buttress Run-Out Gauge is designed to determine threading tool run-out on Improved Buttress Tubing (0-45 Degree). It is stabilized in the thread by a specially designed body equipped with three .036 Diameter Tungsten Carbide contacts. While in use, the measuring point can then remain in the root of the thread for an accurate run-out reading.

1211M
Gauge Name: Buttress Run-out Gauge, Metric
Thread Type: Buttress Casing
Size Range: All External Threads 114mm & Larger
Dial Type: 0~50~0, Balanced Dial w/ Revolution Counting Hand
Graduation: 0.01mm
Dial Travel: 3mm 
Anvil Position: The body of this gauge is designed to remain parallel with the threads on the pipe while in use. It utilizes two tungsten carbide contacts that fit in the threads of the pipe to make a more steady and solid fit of the gauge into the pipe thread.
.
Description: The 1211M Buttress Run-Out Gauge is used to check the threading tool run-out on external API Buttress Casing thread. The body is stabilized in the thread grooves through the two specially designed Tungsten Carbide contacts, allowing the measuring point to record a true run-out reading of the thread root near the triangle marking.

1211-A/M
Gauge Type: Buttress Run-out Gauge, Metric
Thread Type: Buttress Tubing (0-45 Degree)
Size Range: All External Threads 114mm & Larger
Dial Type: 0~50~0, Balanced Dial w/ Revolution Counting Hand
Graduation: 0.01mm
Dial Travel: 3mm 
Anvil Position: The body of this gauge is designed to remain parallel with the threads on the pipe while in use. It utilizes four tungsten carbide contacts that engage the thread grooves to make a more steady and solid fit of the gauge into the pipe thread.

.
Description: The 1211-A/M Buttress Run-Out Gauge is designed to determine threading tool run-out on Improved Buttress Tubing (0-45 Degree). It is stabilized in the thread by a specially designed body equipped with three .036 Diameter Tungsten Carbide contacts. While in use, the measuring point can then remain in the root of the thread for an accurate run-out reading

5886CM
Gauge Type: Height Gauge, Metric
Thread Form: API Buttress Casing 
Size Range: External and Internal Thread Diameters from 114mm to 339mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand
Graduation: 0.01 mm 
Dial Travel: 3 mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face perpendicular to thread axis. A special feature specifically for Buttress Casing, is that the measuring contact is located closer to the back of the anvil. This allows the user to record height readings closer to the "black thread" area while always resting on perfectly formed threads.

Description: The 5886CM is an External Thread Height Gauge used on External and Internal API Buttress Casing threads ranging from 114mm to 339mm. By first "zeroing" your height gauge on the 1233-A setting standard, the product error is read on the dial. The measurement taken then indicates the deviation from the API Nominal, not the actual thread height. This gauge also features a Revolution counting hand on the indicator and is equipped with a Tungsten Carbide Ball Point. 

5886BM
Gauge Type: Metric Height Gauge, Metric
Thread Form: Improved Buttress Tubing 
Size Range: External and Internal Threads in sizes of 89mm to 393mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand 
Graduation: 0.01mm 
Dial Travel: 3mm minimum
Anvil: Hardened steel, 60 degree V cross section, Dial Face perpendicular to thread axis. The anvil on the 5886BM is specially designed for the measuring of Improved Buttress Tubing ( 0-45 Degree Flank Angles). This special design utilizes a locator pin and an indented anvil to allow the 36 Degree Cone Point to rest perfectly at the root of the thread in order to get the most accurate reading. 

Description: The 5886BM is used only on the external Improved Buttress Tubing threads. By first "zeroing" your height gauge on the 1231-E setting standard, the product thread height error is read on the dial. The measurement taken then indicates the deviation from the nominal, not the actual thread height. This gauge also features a Revolution counting hand on the indicator. 

5886-MB-16
Gauge Type: Height Gauge, Metric
Thread Form: API Buttress Casing 
Size Range: External and Internal Thread Diameters from 406mm to 508mm.
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand
Graduation: 0.01mm 
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, specially designed to keep the measuring axis perpendicular to the pipe axis, Dial Face perpendicular to thread axis 

Description: The 5886-MB-16 is an External Thread Height Gauge used only on External and Internal API Buttress Casing threads ranging from 114mm to 339mm By first "zeroing" your height gauge on the 1233-SB-16 setting standard, the product error is read on the dial. The measurement taken then indicates the deviation from the API Nominal, not the actual thread height. This gauge also features a Revolution counting hand on the indicator and is equipped with a 1.82mm diameter Ball Point.

5886-GM
Gauge Type: Ring Groove Height Gauge, Metric
Thread Form: Ring Grooves on Couplings 
Dial Type: 0~10~0, Balanced w/ Revolution Counting Hand
Graduation: .01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, specially designed to keep the measuring axis perpendicular to the pipe axis, Dial Face perpendicular to thread axis 

Description: This 5886-GM is used to record a measurement of groove eccentricity. It is specially equipped with cylindrical contact point, which enables a firm contact with the groove. The measurement shown indicates the actual thread height relative to the bottom of the groove. A measurement can be made either by rotating the coupling while measuring or by obtaining several different readings.



Thread Height



About Allen Gauges  |  Factory Repair Service  |  Foreign Representation
Contact Info  |  Home